Platinum Servo Drive Compliance with Standards

Functional Safety

StandardItem
IEC 61800-5-2:2016Adjustable speed electrical power drive systems – Part 5-2: Safety requirements – Functional
EN ISO 13849-1:2008Safety of machinery – Safety-related parts of control systems – Part 1: General
principles for design
EN 61508-1:2010Functional Safety of electrical/electronic/programmable electronic safety
related systems Part 1: General requirements
EN 61508-2:2010Functional Safety of electrical/electronic/programmable electronic safety related
systems Part 2: Requirements for electrical/electronic/programmable electronic
safety-related systems
EN 61508-3:2010Functional Safety of electrical/electronic/programmable electronic safety related
systems Part 3: Software requirements
EN 61508-4:2010Functional Safety of electrical/electronic/programmable electronic safety related
systems Part 4: Definitions and abbreviations

Electrical Safety

SpecificationDetails
EN 61800-5-1:2007Adjustable speed electrical power drive systems – Part 5.1: Safety
requirements - Electrical, thermal and energy

Environmental

SpecificationDetails
Approved IEC60068-2-78
Environmental testing – Damp heat, steady state
Approved IEC60068-2-6
Environmental testing –Vibration (sinusoidal)
Approved IEC60068-2-2
Environmental testing – Dry heat
Approved IEC60068-2-27Basic environmental testing procedures - Shock

Electromagnetic Compatibility

SpecificationDetails
EN 61800-3:2004/A1:2011Adjustable speed electrical power drive systems -
Part 3: EMC requirements and specific test methods
EN 61800-5-2: 2017
Annex E
Adjustable speed electrical power drive systems –
Part 5-2: Safety requirements – Functional

Other Compliant Standards

Quality Assurance 
ISO 9001:2015Quality Management
ISO 14001:2015Environmental Management System
Design
IPC-D-275
IPC-SM-782
IPC-CM-770
Printed wiring for electronic equipment (clearance, creepage,
spacing, conductors sizing, etc.)
Reliability
MIL-HDBK- 217FReliability prediction of electronic equipment
(rating, de-rating, stress, etc.)
Workmanship
In compliance with IPC-A-610, level 3Acceptability of electronic assemblies
In compliance with IPC-A-620, level 3Requirements and Acceptance for Cable and Wire
Harness Assemblies
PCB
In compliance with IPC-A-600, level 3Acceptability of printed circuit boards
Packing
In compliance with EN 100015Protection of electrostatic sensitive devices
Environmental
In compliance with WEEE Directive 2012/19/ECWaste Electrical and Electronic Equipment regulations (WEEE)

Note: Out-of-service Elmo drives should be sent to the nearest
Elmo sales office.
In compliance with with ROHS Directives
2011/65/EU and 2015/863
Restrictions on Application of Hazardous Substances in
Electric and Electronic Equipment (RoHS)