機能安全
| Safe Torque Off (STO) Safety Standard | Item |
|---|---|
| The related standards below apply to the performance of the servo drives as stated in the environmental conditions in section 15.1 Gold Line. | |
| IEC 61800-5-2:2017 | Adjustable speed electrical power drive systems – Safety requirements – Functional |
| EN ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems. |
| EN 61508-1:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems |
| EN 61508-2:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems |
| EN 61508-3:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems |
電気安全
| Specification | Details |
|---|---|
| The related standards below apply to the performance of the servo drives as stated in Chapter 15: Environmental Conditions. | |
| EN 61800-5-1:2007 Or UL 61800-5-1 | Adjustable speed electrical power drive systems – Part 5.1: Safety requirements - Electrical, thermal and energy |
| Recognized CSA C22.2 NO. 274-17 | Adjustable speed drives |
EMC
| Specification | Details |
|---|---|
| EN 61800-3:2004/A1:2011 | Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods |
| EN 61800-5-2: 2017 Annex E | Adjustable speed electrical power drive systems Part 5-2: Safety requirements – Functional |
環境
| Specification | Details |
|---|---|
| IEC60068-2-78 | Damp heat, steady state |
| IEC60068-2-6 | Vibration (sinusoidal) |
| IEC60068-2-2 | Dry heat |
| IEC60068-2-27 | Shock |
CE適合宣言
適合宣言については、 CE/EU適合宣言(1) を参照してください。
| Standard | Details |
|---|---|
| Conformity with CE 2006/95/EC | EC Low Level Directive, 2006/95/EC as per Gold Line CE Declaration. |
| Conformity with CE 2004/108/EC | EC Electromagnetic Compatibility Directive 2004/108/EC as per Gold Line CE Declaration. |
| Conformity with CE 2006/42/EC | Machinery Directive 2006/42/EC as per Gold Line CE Declaration. |
その他の準拠規格
| Quality Assurance | |
|---|---|
| ISO 45001:2018 ISO 9001:2015 ISO 14001:2015 | Occupational Health and safety Management System Quality Management Environmental Management System |
| Design | |
| IPC-D-275 IPC-SM-782 IPC-CM-770 | Printed wiring for electronic equipment (clearance, creepage, spacing, conductors sizing, etc.) |
| Reliability | |
| MIL-HDBK- 217F | Reliability prediction of electronic equipment (rating, de-rating, stress, etc.) |
| Workmanship | |
| In compliance with IPC-A-610, level 3 | Acceptability of electronic assemblies |
| In compliance with IPC-A-620, level 3 | Requirements and Acceptance for Cable and Wire Harness Assemblies |
| PCB | |
| In compliance with IPC-A-600, level 3 | Acceptability of printed circuit boards |
| Packing | |
| In compliance with EN 100015 | Protection of electrostatic sensitive devices |
| Environmental | |
| In compliance with WEEE Directive 2012/19/EC | Waste Electrical and Electronic Equipment regulations (WEEE) Note: Out-of-service Elmo drives should be sent to the nearest Elmo sales office. |
| In compliance with with ROHS Directives 2011/65/EU and 2015/863 | Restrictions on Application of Hazardous Substances in Electric and Electronic Equipment (RoHS) |